P6

iTrader: (5)

bnam could you possible mill the battery tray for less weight kit chassis is 105g and how thick?

Bman's 3XNT

iTrader: (71)

Mine are milled some and thickness is .090"

P6

iTrader: (5)

bman thats right on what i wanted to hear unfortunately i had to pay in on my taxes so my rc fund is gone for now ,, but your doing things right once i got the fund back ill be interested

Khador12

Will there be a recess for servo lines?

ewashburnaf

iTrader: (14)

I'm trying this somewhat "inline" setup with my son's buggy. Here's what it looks like right now. I'm just hoping it doesn't take too much away from the rear bite. Moving from the rear to the front is the receiver, esc, battery, and finally the servo. The battery has about a total of 5mm to play with front or rear. I couldn't get the ESC under the rear body post mount so I put the receiver there. I also need to attach his transponder to the opposite side of the capacitors to get a little better balance.

knowitall156

iTrader: (10)

I run the Speed passion GT 2.0 pro under the rear body post minus the fan. You just have to dremel off a few millimeters to make it fit. The capacitor gets run on the right side with the switch and the receiver lap counter gets run on the left to equalize the weight. that way you have nearly full movement of the shorty pack.

Bman's 3XNT

iTrader: (71)

Yes, I have a few pics right now but want to show them off when they come back from Hard Coating, should be a week or so. The Holiday is gonna slow things down a bit. I will post ASAP I promise.......

ekt

iTrader: (4)

RDRP's aluminium c-hubs/wing mounts are in stock at AMain

nolimit208

iTrader: (8)

Jconcepts body fits all the chassis avail also. the front you just cut a little longer on all the +alum chassis, the plastic chassis it also works fine just flares out alittle but almost unnoticable.

nolimit208

iTrader: (8)

Cant wait! Been wanting a +8 alum chassis for a while, and yours being stiffer is preferred for my clay track

glenng

iTrader: (1)

link please. just searched to no avail.

ohiostatechamp

iTrader: (59)

I am interested in the hard anadized +8 chassis. I would also like to see pics.

ekt

iTrader: (4)

http://www.amainhobbies.com/index.ph...ew&filter_cat=

Bman's 3XNT

iTrader: (71)

Hey guys glad to see the interest. After this first batch they will be available either raw or hard coated to save you a few bucks. As long as you run a chassis protector and limit rear drop by your shocks the chassis shouldn't get ruined. I already showed a few thread members the pics. Those being people that inquired about it when purchasing skid plates. Stay tuned....Thanks

8ight-e

iTrader: (58)

Please help with a part #, only the rear hubs show up in stock... I've tried all combo's of names w/o luck for those.