3 racing new F1
#4171
Tech Fanatic
iTrader: (13)
yes mckune FGX did got 2nd in carpet national. But if you read the setup, the rear is pretty much hard like a pan car. (super stiff spring + super stiff damping + spacer under ball stud to increase spring/damper stiffness).
It's the slightly flawed bumpy tracks that give FGX the advantage. Pan car can't drive on a parking lot track.
I like the FGX for it's design, I like to play with it once a while, maybe even race it once a while. not really looking for a win with it though.
If you want a F1 to win race at the first place, just get a pan car. easier, faster (on good track), and actually cheaper.
#4172
PS3 F-1 2012 Champ Invite
Pacific F1 PS3 Championship
We are a bunch of F-1 aficionados, some newcomers some intermediate gamers of Codemasters Formula-1 2012 game (Sony Play Station 3 (PS3).
We like to invite you to join us online in our own Pacific Standard Time (PST) F-1 World Championship, which will take place every Thursday night prior to the F-1 GP racing weekend.
Online via the Formula-1 2012 Codmaster PS3 game platform.
The simulation options are as follows:
We are a bunch of F-1 aficionados, some newcomers some intermediate gamers of Codemasters Formula-1 2012 game (Sony Play Station 3 (PS3).
We like to invite you to join us online in our own Pacific Standard Time (PST) F-1 World Championship, which will take place every Thursday night prior to the F-1 GP racing weekend.
Online via the Formula-1 2012 Codmaster PS3 game platform.
The simulation options are as follows:
When and where?
1. Race calendar = every Thursday before the F-1 weekend start / First race March 14, 2013... Etc.
2. Race start: All racers should be logged inn and in their cyber garage at PST 8:00PM we will start at 8:05PM (Lobby is open at 7:45 PST)
3. Race venues = F-1 calendar (first race: Australia... etc)
Simulation:
4. Race length: 25% = 15 Lapps 1 pit stop
5. Damage: realistic
6. Tire ware: realistic
7. Climate: dynamic
8. AI (if needed): amateur
9. Car performance: equal
10. Points scoring: Same as F-1
I will be keeping scores and posting them either on Codemasters or/and on line forum (TBA)
Final results screen shots will be kept for each race.
There may be trough offs but Bernie still thinking about it (TBA)
11. Maximum competitors: 16 per race (register early to secure your spot)
Car set up
12. Gear: manual/suggested
13. ABS : OK
14. Traction control: Medium OK
15. Pit assistance: Off
Extras:
16. We encourage everyone to were head phones so we can communicate during the race.
Official language: English Driver swearing or using foul language will be black flagged (0 tolerance)
17. Gentleman racing conduct will be observed and enforced in Alonsos own words -You musta leave the space'a to passe-
18. Pre registration are very welcome and will secure you a spot in the PST F1 PS3 2013 Championship
Email to [email protected]:
Full name,
PS3 ID
City/Country
Team request (if we can provide fix teams maybe will do so)
If we need to cover positions for a race A.I. will be used and their best result scored.
We must not let A.I. win the PST F-1 PS3 Championship!
See you online 7:45 PM PST Thursday March 14, 2013 for the Australia GP
Cordially,
Mr. What-Brakes
We must not let A.I. win the PST F-1 PS3 Championship!
See you online 7:45 PM PST Thursday March 14, 2013 for the Australia GP
Cordially,
Mr. What-Brakes
#4175
front upper arm dimensions
Guys
can someone tell me the dimensions for the front upper arm:
X - from front inner ball to the knuckle pin ball
Z - from rear inner ball to the knuckle pin ball
I want to try some different turnbuckles and ball ends
But I haven't ordered my FGX yet )
Thanks!
can someone tell me the dimensions for the front upper arm:
X - from front inner ball to the knuckle pin ball
Z - from rear inner ball to the knuckle pin ball
I want to try some different turnbuckles and ball ends
But I haven't ordered my FGX yet )
Thanks!
#4178
Tech Fanatic
Does anyone know if the Rabbit chassis conversion is still available for the FGX, and if so, where would one purchase it from?
#4179
Tech Master
#4180
Tech Fanatic
#4182
Tech Fanatic
Thank you, but unfortunately that's the HKS chassis which is too wide near the front for any Tamiya or other F1 bodies. I don't know why they made it so wide near the front like that?!
That's why I liked the Rabbit conversion, as it was narrower at the front and had the same wheelbase as the F104, thus accommodating a wide variety of F1 bodies. But I don't think it's made anymore, unfortunately.
That's why I liked the Rabbit conversion, as it was narrower at the front and had the same wheelbase as the F104, thus accommodating a wide variety of F1 bodies. But I don't think it's made anymore, unfortunately.
#4183
hi guys, which bodies will fit the FGX will the Tamiya bodies fit! Do they do a big difference like in touring, which one to choose if possible send a link whe to purchase.