The chassis is not an issue to have to wait for it to be revised. I barely removed any material.

They told me that back in November when I built the pre-production kit to test and it had a non anodized chassis. So it will be a running change as soon as they run out of the older chassis - same as with every running change from any brand.

It is not a big deal, it takes less the 5 min to fix with a dremel - only if needed. When you screw down the front or rear bulkhead, spin the hubs. If they spin free then you are good. If not, remove the 4 screws and dremel the inner edge of the slot a little so the ring gear does not touch the chassis.

I built the car today and everything was smooth. No issues anywhere. Ring gear cleared the chassis and I used white grease to help track the pinion and ring gear mesh. It was perfect. I did install a thin, very thin 16mm shim behind the inner bearing of the pinion to push the pinion towards the ring gear. It was pretty notchy and not at all needed. Dunno if anything was updated as it's the first Intech kit that I've built. Everything was perfect and was not short any bolts, had many assorted nuts and bolts left over for extra.

so I wonder who's going to be the next big name USA pro driver for Intech?

Shoot we got him already! Mr. Greg Bird!

Hardy HAR HAR. Got David Osborne. But never the less, I see the PUN intended....LOL

Gotta say, I've built alot of car kits like many and have done alot of testing through RC Driver. Excellent quality on this car. Very Impressed.

Just keeping it real bud! So are you and Osborne going to Dixons for sure? If so I may risk the divorce this time!

Brian, Looks like we're probably headed to The Factory this Saturday. Hopefully we can meet up soon.

I don't blame ya, I like Jeffs but it is not the best place to test a new buggy.

It sure ante I totally agree.

E-Buggy is ready.

Looks very nice!

thanks for the great paint job!

Looks great gene.

Yep, looks awesome! Thank god for people that can paint, because I'm not one of them! Can't wait to get mine together.