Measure it....i believe the difference between the a and c hub is 2 washers...but not positive

That might be pretty tough. The Avid carbon fiber ears I have are drilled for C and B, and the holes are siamesed together.

2mm lower

- A to C is 2mm
- A = B but the B holes are between the A holes....if that makes sense

News to me , I don't think so though ....

picture ?

People.. I'm just having fun with everyone. It's Friday! Everyone is so serious on here about shock shaft friction, coefficients and roll center mods.

These are serious topics, no one is allowed to have fun mmkay . I thought i saw a picture where someone made c-hubs out of plastic hubs and would rather run the plastic hubs so thats why i brought it up.
Ive made a hub tower that was even higher then the A and B hubs a while back but requires the high clearance ball cups but it only worked when my track had extreme grip and i was running a fairly soft suspension set-up.

the picture above of the avid would be what you need to make. I dont know how well the plastic would hold up with the over lapping holes. Might need a washer that bites in to keep it in place.

Thanks guys, I'm running other rear hubs and don;t have any of the ABC hubs so have no reference to what they are like

http://www.rctech.net/forum/r-c-item...-1-worlds.html
Need a short break from the hobby...

I`m doing the D hub tonight .....


ELI

Can use the plastic hub to make a C hub , remember we just drilled when the C mod was new to us .

Super nats starts at 11pm pst right?

The BB shocks are here! I thought it was going to be a few more weeks

http://www.amainhobbies.com/index.php/cPath/1_25_1450_1788/n/RC-Cars-Trucks-Parts-Team-Associated-RC10B41

lol.. bastard

Correct and practice starts at 9.