Community
Wiki Posts
Search

RC10B4.1 FT/WC

Thread Tools
 
Search this Thread
 
Old 07-15-2012 | 01:39 AM
  #16606  
Tech Adept
 
Joined: Sep 2011
Posts: 108
Default

Thanks, will put some glue onto the CVA pin retainer.

Looking at the manual, it has a warning on the CBA page, what does it mean don't use CVA pin retainer if using set 4-40 screw? Where does that come into the build??

Also what oils you guys using for front and rear shocks? and how much rebound?
Attached Thumbnails RC10B4.1 FT/WC-screen-shot-2012-07-15-5.52.49-pm.png  

Last edited by Vinno; 07-15-2012 at 01:54 AM.
Vinno is offline  
Old 07-15-2012 | 01:41 AM
  #16607  
CraigMBA's Avatar
Tech Elite
iTrader: (22)
 
Joined: Mar 2003
Posts: 2,838
From: Valley of the Dirt, CA
Default

I'm confused by that too. Is this an either/or deal?
CraigMBA is offline  
Old 07-15-2012 | 03:19 AM
  #16608  
Tech Master
iTrader: (55)
 
Joined: Jan 2012
Posts: 1,130
Default

"dab of CA glue on the CVA retainer shim"
What is a CVA retainer shim? Part *? Something?
shagnat is offline  
Old 07-15-2012 | 03:48 AM
  #16609  
LOSI123's Avatar
Tech Elite
iTrader: (63)
 
Joined: Jan 2007
Posts: 2,610
From: Gold Coast-Australia
Default

Wild Cherry,

Can you tell me if any of the Losi Compounds in tires are close to a JC Greeen, or Blue?

Was wanting to pick up some Bk Bars and Taper Pins but Ive never had Losi Tires before
LOSI123 is offline  
Old 07-15-2012 | 06:32 AM
  #16610  
Tech Regular
iTrader: (3)
 
Joined: Nov 2008
Posts: 323
From: spring hill tn
Default

losi red compound are the closest to the other brands
mel_russ615 is offline  
Old 07-15-2012 | 08:59 AM
  #16611  
TJMac's Avatar
Tech Addict
iTrader: (2)
 
Joined: Aug 2011
Posts: 509
From: Central Florida
Default

Originally Posted by shagnat
"dab of CA glue on the CVA retainer shim"
What is a CVA retainer shim? Part *? Something?
On the diagram Vinno posted its 7996. If you run the set screw you don't need the retainer. I run both, just because.
TJMac is offline  
Old 07-15-2012 | 09:04 AM
  #16612  
nismomike's Avatar
Tech Fanatic
iTrader: (6)
 
Joined: Jul 2011
Posts: 867
From: Gilbert AZ
Default

[QUOTE=Wild Cherry;10975105]
Originally Posted by CraigMBA
Are we going to do this again?


It was a brand new kit out of the box.[/B]. All of it.



And guess what? They were new, and noisy too.

Do you get it that this was a brand new kit

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>


Craig ?



Just send me your ride , cus its brand new and nice & tight ..

Promise to send you mind , its not so new, not so tight , but way fast & also very quite.....

Just ask anyone from around here ...
apologies bro
can't take advise using sandpaper on the top shaft gear ...


BTW
No! U don't get the PINK ProLine BULL DOG

Is that a shortened SC10 CF battery strap in there?
nismomike is offline  
Old 07-15-2012 | 09:21 AM
  #16613  
Wild Cherry's Avatar
Tech Legend
 
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Default

Originally Posted by LOSI123
Wild Cherry,

Can you tell me if any of the Losi Compounds in tires are close to a JC Greeen, or Blue?

Was wanting to pick up some Bk Bars and Taper Pins but Ive never had Losi Tires before
losi , awesome question

Sorry, have limited experience with most of the JConcept compounds cept Gold.


believe JC green is similar to Red Losi



nismomike


U got a SHARP EYE

yes, a carbon Sc10 battery strap in there ....
Wild Cherry is offline  
Old 07-15-2012 | 09:25 AM
  #16614  
Wildcat1971's Avatar
Thread Starter
Tech Prophet
iTrader: (84)
 
Joined: Apr 2012
Posts: 17,389
From: Arizona
Default

Originally Posted by Wild Cherry
losi , awesome question

Sorry, have limited experience with most of the JConcept compounds cept Gold.


believe JC green is similar to Red Losi



nismomike


U got a SHARP EYE

yes, a carbon Sc10 battery strap in there ....
Does green hold up better than red?
Wildcat1971 is offline  
Old 07-15-2012 | 09:28 AM
  #16615  
Wild Cherry's Avatar
Tech Legend
 
Joined: Aug 2001
Posts: 22,595
From: TRCR Modified Driver
Default

Originally Posted by Wildcat1971
Does green hold up better than red?
All depends on how abrasive the track conditions are ...

wet clay tire wear can be quite low compared to dry
Wild Cherry is offline  
Old 07-15-2012 | 10:28 AM
  #16616  
idrummerboy13's Avatar
Tech Elite
iTrader: (15)
 
Joined: Jul 2010
Posts: 2,021
From: Deer Park
Default

Originally Posted by Wild Cherry
All depends on how abrasive the track conditions are ...

wet clay tire wear can be quite low compared to dry
Green is for lower bite or dryer conditions. blue is opp. pink works best in damp conditions. sweep tendroid is also really good. In silver they have the corner speed and grip everyone likes. pl scrub front is dialed also.
idrummerboy13 is offline  
Old 07-15-2012 | 11:19 AM
  #16617  
Tech Addict
iTrader: (20)
 
Joined: Aug 2009
Posts: 719
Default

http://www.teamassociated.com/pdf/ca...Reedy_Race.pdf

what are the losi 56 pistons referred to in this setup?

these?

http://www.amainhobbies.com/product_...stons-56-Red-4
Dillon71 is offline  
Old 07-15-2012 | 11:19 AM
  #16618  
Rob Phillips's Avatar
Tech Master
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,747
From: Indianapolis
Default

AE train now boarding!!!!

I've been running a TLR22 since returning from a break in racing. After being the subject of much ridicule from my friends, I decided to sell one of my Losi's and give the B4.1WC a try. Hopefully, I will not be let down. I haven't wheeled an AE buggy since the original RC-10.

...and just out of curiosity, why are a lot of you guys running MIP axles? Reminds me of the old days! lol
Rob Phillips is offline  
Old 07-15-2012 | 11:22 AM
  #16619  
Rob Phillips's Avatar
Tech Master
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,747
From: Indianapolis
Default

Originally Posted by Dillon71
Those are the red losi pistons that were used on pretty much all the XXX line of cars (and others).

Oops, didn't see your second link...yep that's them.
Rob Phillips is offline  
Old 07-15-2012 | 11:43 AM
  #16620  
Rob Phillips's Avatar
Tech Master
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,747
From: Indianapolis
Default

I want to take advantage of the 20% off trade in deal with Savox, so can anyone suggest a good Saox servo to use with this buggy?

Thinking of a 1258TG...thoughts?
Rob Phillips is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.