wts tamiya ta05
#1
wts tamiya ta05
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
SOLD!!!!
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
SOLD!!!!
Last edited by 1XshadowzX1; 03-25-2012 at 05:57 AM. Reason: sold
#2
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#3
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#4
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
upz.
#5
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#6
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#7
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#8
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#9
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#10
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#11
--------------------------------------------------------------------------------
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
Selling my tamiya Ta-05, as i don't have time for it anymore. I am looking to sell it for $280 in Singapore only
What you will be getting:
Controller: Futaba mega tech 2PL 27Mhz
Chassis: Tamiya Ta-05 fully assembled
Tyre: Pvc drift tyre with rims + rubber touring tyre with another set of rims
Motor: HPI Saturn 20T + I'll throw in my old sliver can (brush worned but still works well)
Reciever: Futaba R152JE 2 channel
Esc: Futaba MC330CR
Servo: Futaba S3050 Digital Servo
wall charger(No batt)
Spare parts, extra screws, cross wrench, 2 body shell
Preferred deal Location: Boon Lay or any where else convinent
Contact me at (965SIX8five4eight)
#12
Tech Rookie
thanks for the deal !