1LikesB44.1 Thread
03-01-2012 | 03:50 AM
#1487
John -- I checked with Brent and he said that he always starts out with his std setup that is on the AE site. As far as big bore springs goes you can get the Kyosho's or he said that Due is making the Losi springs work good (red/yellow).
On another note...are you guys sealing the chassis with CA when you build the car? I cant remember whether or not I did it with my last 4wd, but need to get this one built up for Cactus. Thanks.
On another note...are you guys sealing the chassis with CA when you build the car? I cant remember whether or not I did it with my last 4wd, but need to get this one built up for Cactus. Thanks.
Cheers formthe help, I am also going to run his 2011 surf classic setup on my b4.1
03-01-2012 | 08:40 AM
#1490
Tech Master
iTrader: (120)
Joined: Apr 2011
Posts: 1,076
From: SoCal - Chillin in the LBC
Rit is fabric dye you can pick up at CVS or RiteAid for $6 or $7. Really easy to do. I use an old coffee can on the burner stove on my BBQ. Only takes about 20- 30min. DE wheels are cool too but harder to come by at the lhs than white AE wheels.
http://www.youtube.com/watch?v=wFif1YXe6CE
http://www.youtube.com/watch?v=wFif1YXe6CE
Last edited by jamr1130; 03-01-2012 at 08:55 AM.
03-01-2012 | 07:03 PM
#1493
I mount my transponder on my steering servo using this velcro -
http://www3.towerhobbies.com/cgi-bin...?&I=LXK203&P=7
I have never had the transponder come loose, even in hard crashes in a touring car.
03-01-2012 | 07:25 PM
#1494
I mount my transponder on my steering servo using this velcro -
http://www3.towerhobbies.com/cgi-bin...?&I=LXK203&P=7
03-01-2012 | 07:45 PM
#1495
03-01-2012 | 09:28 PM
#1496
Tech Master
Joined: Dec 2002
Posts: 1,922
Servo extension leads on both so you just unplug it without disturbing your receiver plugs and velcro as suggested above.
