Radio Control Hobbies & Raceway - Waterbury, CT.
Joined: Nov 2009
Posts: 2,426
From: Newhaven ***RCHR***
Is anybody going to SC Showdown on March17?
I am going and wanna see some locals there, i wanna do some whipping in my favorite class. 4x4 sc with the losi scte.
Joined: Sep 2002
Posts: 7,350
From: Greenvill, NC
How did you place at Motorama? Only the biggest electric event in the country, 200 4x4 SCT . It is your class...
Suspended
iTrader: (26)
Joined: Feb 2012
Posts: 1,471
Hey mark i have a problem that i hope maybe you can fix. LRP sent me my v2 tc spec back and i was using it in my house changed the pinion turn it on it starts making the motor like flinch. but wont work with full throttle just dies out but it dosent like turn off so i was wondering if you can take a look at it tmro because i really wan to race my 4wd and now the stupid thing dosent work hopefully it was me and i touched a setting.
Tech Regular
iTrader: (4)
Joined: Dec 2011
Posts: 394
Hey mark i have a problem that i hope maybe you can fix. LRP sent me my v2 tc spec back and i was using it in my house changed the pinion turn it on it starts making the motor like flinch. but wont work with full throttle just dies out but it dosent like turn off so i was wondering if you can take a look at it tmro because i really wan to race my 4wd and now the stupid thing dosent work hopefully it was me and i touched a setting. 

Suspended
iTrader: (26)
Joined: Feb 2012
Posts: 1,471




Tech Regular
iTrader: (4)
Joined: Dec 2011
Posts: 394
As far as the 22 and forward bite, have any of you tried shimming the tranny up 1mm? Makes a difference in forward traction and you won't lose any side bite if you only go 1mm. It's one of the primary tuning options on the XFactory buggies and it really makes a difference on traction. There's a how to in the Losi Blogs for which shims to use, they recommend the alloy shims due to the outside diameter of the 1mm shim. It's a bit of a pain as you need 6 hands to get it to all fall into place the right way but it does make a big difference.
Freddie you got that camber link and ball stud ready for me or what?!?
Suspended
iTrader: (26)
Joined: Feb 2012
Posts: 1,471
Are you the James that's my "neighbor" in the back room? Hit me up, if you need I could let you borrow an esc while you're working through the LRP snafu.
As far as the 22 and forward bite, have any of you tried shimming the tranny up 1mm? Makes a difference in forward traction and you won't lose any side bite if you only go 1mm. It's one of the primary tuning options on the XFactory buggies and it really makes a difference on traction. There's a how to in the Losi Blogs for which shims to use, they recommend the alloy shims due to the outside diameter of the 1mm shim. It's a bit of a pain as you need 6 hands to get it to all fall into place the right way but it does make a big difference.
Freddie you got that camber link and ball stud ready for me or what?!?
As far as the 22 and forward bite, have any of you tried shimming the tranny up 1mm? Makes a difference in forward traction and you won't lose any side bite if you only go 1mm. It's one of the primary tuning options on the XFactory buggies and it really makes a difference on traction. There's a how to in the Losi Blogs for which shims to use, they recommend the alloy shims due to the outside diameter of the 1mm shim. It's a bit of a pain as you need 6 hands to get it to all fall into place the right way but it does make a big difference.
Freddie you got that camber link and ball stud ready for me or what?!?




21Likes

