Tekin RS ESC sensored
R/C Tech Elite Member
iTrader: (66)
I have tried everything I can think of, as you can see over the past few pages
Tech Regular
iTrader: (21)
Hardly telling you to buy something else. We make products that produce fast and consistent lap times. I'd be willing to do it, if the lap times could show the results where there.
I'm still very confident that our boosted software is one of if not the best. Lap times don't lie however....
I'm still very confident that our boosted software is one of if not the best. Lap times don't lie however....
Tech Regular
iTrader: (21)
Randy I sent you a pm
I've got no pending Pm's.
Tech Regular
iTrader: (2)
Tech Regular
iTrader: (2)
Randy, you have PM from me as well.
Tech Apprentice
Come on guys, stop the bitching. I for one have used an RS Pro for nearly 2 years now with no fault at all. Savox servo's are renound for dragging power, but I have used one in my touring car for over 1.5 years with no issue. then again I have heard of drivers who use HobbyWing, LRP all having that same issue due to power drag from the servo.
I personally have been sponsored in years gone by by Speedo manufacturers. What I see Randy diong every day isn't something I would see many other manufacturers doing to help those using their product. The fact being they noticed a glitch with brakes in the latest release and rather than coating over it they held up their hand and said they would get it sorted. that to me is EXCELLENT service from a manufacturer. they could have coated it and left this change for a later release, instead they are clearly pushing to get this sorted for the US guys and their nats championships coming up. this isn't just a 5 minute job to change.
Hardware can and will break at times, and this goes for ALL manufacturers. The guys suffering problems it is a shame, but rather than attack Randy get in touch with their support direct and organise sending the speedo off to them rather than sniping on here, it will get you nowhere fast and won't get your speedo working !
Keep the thread to being about setting up the speedo, help with setup and talk about the upgrade etc. It's been useful to me in setting up for different motors and tracks, but having to go through pages of whinging makes it difficult to find the info a racer needs.
Again, well done Randy for the hard work, and to Team Tekin. I will be sticking with you !
I personally have been sponsored in years gone by by Speedo manufacturers. What I see Randy diong every day isn't something I would see many other manufacturers doing to help those using their product. The fact being they noticed a glitch with brakes in the latest release and rather than coating over it they held up their hand and said they would get it sorted. that to me is EXCELLENT service from a manufacturer. they could have coated it and left this change for a later release, instead they are clearly pushing to get this sorted for the US guys and their nats championships coming up. this isn't just a 5 minute job to change.
Hardware can and will break at times, and this goes for ALL manufacturers. The guys suffering problems it is a shame, but rather than attack Randy get in touch with their support direct and organise sending the speedo off to them rather than sniping on here, it will get you nowhere fast and won't get your speedo working !
Keep the thread to being about setting up the speedo, help with setup and talk about the upgrade etc. It's been useful to me in setting up for different motors and tracks, but having to go through pages of whinging makes it difficult to find the info a racer needs.
Again, well done Randy for the hard work, and to Team Tekin. I will be sticking with you !
Agreed. I've been using RS Pro for 3 years and with 0 issues. I've updated 2 speedos to v222 with no problems at all. Running 2S 17.5T boosted WGT.
Tech Adept
i got my 222 update last week and reprogrammed my speedo i plan on giving it a try tuesday in my 10th scale pan car. i think tekin has a great program. keep up the good work guys.
Tech Elite
iTrader: (8)
Hi Guys,
not interested in floging dead horses, I think Tekin are doing a great job providing this level of consultation and support to their users.
My question is this, can the brownout problem be resolved with the use of a cap connected to the reciver?
I ask, because, back in the brushed days, I would have laps missed when racing modified on carpet with foam. We eventually worked out that because the scoring loop was located on a corner exit where the car was accelerating, that the current draw from the motor was causing the transponder (and probably the Rx and servo) to lose power. I solved the problem by connecting a 4400uf cap to my reciver.
Thanks
Mark
not interested in floging dead horses, I think Tekin are doing a great job providing this level of consultation and support to their users.
My question is this, can the brownout problem be resolved with the use of a cap connected to the reciver?
I ask, because, back in the brushed days, I would have laps missed when racing modified on carpet with foam. We eventually worked out that because the scoring loop was located on a corner exit where the car was accelerating, that the current draw from the motor was causing the transponder (and probably the Rx and servo) to lose power. I solved the problem by connecting a 4400uf cap to my reciver.
Thanks
Mark
Tech Adept
I was having brownout issues using that well known bad pairing of Spektrum and Savox. Fitted a cap to my reciever and problem solved.