Highlife Im heading.down there when I.get my ae 4x4 back. Picking up a buggy.tomm

In my sc10, I have a tekin with airtronics rcvr and dont need a glitchbuster. guess Im lucky. I def think I want a fast servo.

I just think some of.these have way too much tq for such a light buggy. Am I wrong?

Ive still got a Sanwa 942 or 375 in my B4. Im using a Sanwa FSS TX/RX with an M8.

theres no problem, it will just cost you more.

Anyone try the orange and silver fronts with yellow rears on a medium bite clay track, if so which front spring spring did u like best? just wondering if the silvers would have a bad push

It's sooo much more expensive. Trust me, I did it. v2 threaded shocks are like 80 bucks, +8 conversion is about 50, ball diff and outdrives is about 40, those aluminum rear hubs are 35 i think, replacing the dogbones to cva's is another 20, upgrading the motor plate, aluminum hinge brace, turnbuckles, caster blocks. It just all adds up and before you know it you could have bought two FT cars!

As long as the oil, pistons, and shock postion is right you shouldnt notice a big push. Next time I run on the offroad track I am going to switch to the orange infront and just see if there is a difference.. If you do before I do, let me know how it goes!

the silvers actually steer more for me.

Does anyone have a parts list of what is on the world or ft car that is NOT on the RTR versions?

that would be a long and very expensive list! If you have any thoughts on upgrading the RTR to a full on race car, don't. Just buy the Worlds kit. If you're gonna play with it and put it on the track once and be done then don't worry about it...

Use that cool feature up top call search

It's been posted and posted a few times.

Love them. I have them in all the Rear wheels on my Buggy


Savox 1258TG

So I just received my new worlds edition car yesterday. It is missing the the addendum sheet for the ballast weight, as well as front arms so far. So If anyone that has purchased the new buggy has the addendum, would you be willing to email a copy to me?

wow that sucks I have been hearing alot of things about the new worlds car missing parts. I think associated is getting lazy

My Worlds kit was complete but there was a couple parts that were not usable. The long steering rack bolt head was bad and the rear hubs the bearings just fall right out of them!! I took a little red loctite to hold them in place to keep them from spinning. I used the little nylon shims from B-fast to tighten up all the hing pin joints to eliminate all the built in slope. Other than that this thing is ready to rock!!

love to see some reedy setups!