Durango DEX210 Thread
#3467
#3468
Tech Addict
iTrader: (23)
5k in the dif??? wow, i had 2k and didnt like it at all, it seemed darty and wanted to follow the track and by that i mean if the track was high in the center it would dart off to whichever side it was on on acceleration. changed to the ball dif on the spot and it stopped??? i just put the gear dif back in today but only put the AE black grease in this time. are you on an indoor smooth track?
A little unconventional, I know. But don't be afraid to try new things to see if it works for you. Maybe it will work for you and your track and maybe not.
#3473
They fit fine. Thats what I was running on my old DEX410r along with rpm ball links. On my DEX210 i have not had any problems with the original HD links and see no reason to change them out.
#3474
Tech Regular
ream the stock ends a tad so they have some clearance over the turnbuckles and the stock ones are fine.
#3475
#3477
Tech Regular
iTrader: (9)
AMain has some new parts and options listed for the 210
http://www.amainhobbies.com/index.ph...ew&filter_mfr=
http://www.amainhobbies.com/index.ph...ew&filter_mfr=
#3478
Tech Master
iTrader: (26)
I'm still waiting for the red aluminum shock caps and gold front nitride shafts to get in stock. Also need a ball diff rebuild kit.
Would be nice to see the aluminum rear hubs and aluminum rear wheel nuts in stock somewhere too. Yesterday someone at the track broke a rear hub. Interesting break too. Snapped all the way across the top of the toe insert hole. Complete separation.
Marcus or anyone else using the TSR bladders...are you having an issue with the caps bleeding excress oil? Like, puking out and loosing half the shock capacity? One of the bladders will not seal. Was thinking of gluing them.
Would be nice to see the aluminum rear hubs and aluminum rear wheel nuts in stock somewhere too. Yesterday someone at the track broke a rear hub. Interesting break too. Snapped all the way across the top of the toe insert hole. Complete separation.
Marcus or anyone else using the TSR bladders...are you having an issue with the caps bleeding excress oil? Like, puking out and loosing half the shock capacity? One of the bladders will not seal. Was thinking of gluing them.
#3479