Originally Posted by
jmcvicker
Different KV motors may have different wattage numbers for the electric circuit. If a motor of higher KV also is rated at a higher wattage then it may not just be a KV * voltage multiplier.
Correct, need to consider current draw.
Originally Posted by
jmcvicker
Two motors of different KV but same wattage (as Neu motor charts seem to say) may be correct in those calculations. Just change motor and gearing to get the same "result". Maybe present your statement to Steve Neu or other electrical engineers at the motor factories to see if they can give feedback.
The Neu charts I've seen that suggest equal wattage, also indicate different voltages. Rather an important point that you appear to be overlooking, you seem to only mention changing motor and gear.