Originally Posted by snowboardgeek1

Stefan

You have exactly the same problem I was experiencing. I'll try to help you on both...

First problem: I believe the antennae should be connected to the receptacle that's somewhat closest to the antennae hole. What I did, was connect the antennae to one receptacle, and see which one would make the antennae come off easier if I turned the black antennae cover around. One of the receptacles gives the antennae more play, so I used that. Ever since I fixed this problem, I haven't had any loss of frequency or glitches.

Second problem: I used some electrical tape to wrap around the base of the black plastic antennae cover. Works fine. It holds it in one place.