Originally Posted by
Fastforward
How many washers do you have to use to make a noticible difference with Anti-Squat? I had the front blocks flipped over but I am wondering if that is too much.
Flipping the block seems a lot to me. In my case, I used .060 shims (about 1.5mm)
I wanted to get rid of the tire sqweeling when I was entering a corner off power... I did helped a lot.
Now I just changed the shim with .030 and used the #1 hole in the front tower (instead of #2). It didn't felt right using that shock position when I was using the 15F/12.5R spring combo but now that I swich to 17.5F/15R It may be better. I will see how it work on the track later this week...