R/C Tech Forums - View Single Post - TC3 Pushing
Thread: TC3 Pushing
View Single Post
Old 01-01-2007, 12:30 PM
  #5  
Centerline Racing
Tech Master
iTrader: (47)
 
Centerline Racing's Avatar
 
Join Date: Nov 2006
Location: Twin Cities, MN
Posts: 1,223
Trader Rating: 47 (100%+)
Default

Thanks, I really appreciate all the advice, thats why I posted. Keep it coming.
Shock Oil: I have been told that some use up to 80 wt in front.

The track is roughly 36x58 (I think) quite small but loads of fun. That is the reason for the gearing. Other's, similar in equipment, run 72T/18T gears, I do have a 64p 100T/30T that I plan to switch over to soon. Then experiment with roll-out to get a good gearing set.

Most guys at this track just sauce the inner 1/2" of the fronts, I tend to follow their lead, rears full. All four every heat.

If I have no drag brake, I roll way too fast and miss the corner. If I slow down any sooner, then I am going about half speed from the other drivers.

Thanks
Allan
Centerline Racing is offline