Originally Posted by
lyons238
2mm internal limiters in the front shocks to limit droop. 0 limiters in rear shocks. these cars have a lot of front droop and little rear droop so this makes things perfect on indoor clay tracks.
also for the servo - you dont need any shims on the servo itself, just potentially shims between the ball stud and the servo horn - i recommend an alum servo horn.
good luck. PM me if you have any questions - i know these cars in and out.
so Stephen .. if I run lower limiters like 1mm or even 0 limiters in front, would that make the buggy jump "wing high" / "nose down" all the time?