wierd error codes
I just purchased a Tekin RC Pro ESC to run a 1/12 scale single cell LiPo with a 13.5.
I ran one pack on it and it ran great, with a roll out of 101.04, and the motor came off the track at 120 F at 6 minutes.
The problem that I'm having, is after letting everything cool off, I try to go out again, but the 5 led's in a row from the mode button to the left are flashing, and the get brighter when I spin the rear tire. I get power to the servo, but nothing to the motor.
I am running a novac booster, all three leads are in the reciever correctly, and I cut the switch out of the ESC and taped the wires to keep them from touching.
After the issues started, I pulled the hot wire out of the reciever and let the ESC switch wires touch and still having the same thing.
I HAVE NOT double powered the car yet. I'm stumped. I tryed syncing the ESC to my computer but I get an error code. Any insight would be great. Thanks in advance, Todd.