Originally Posted by
nikos2002
ohhwee - check the sensor wires have a good connection (both motor and speedo) - if the lights are showing forward, brake and neutral, its trying to send the power to the motor. If you have a different sensor wire try that.
SoCal - congrats!!!
Don't have extra sensor wire checked the sensor wire it's good and plug in sung..I did cut the 3 ABC wire to motor/Esc a bit shorter because it was too long..cutting the motor wire bit shorter don't affect it right?
Also when I soldered the wires I don't have any solder bridging or touching each other everything is shrink tube..
Also this is my first sensor esc/motor I have a mmp with castle motor..will sensor motor/esc still turn without sensor wire plug to motor?
Thanks..