R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 12-04-2011 | 06:57 PM
  #911  
bigjayjay1's Avatar
bigjayjay1
Tech Champion
iTrader: (87)
 
Joined: Jul 2009
Posts: 5,614
Default

Guys I'm struggling with the ebuggy the rear isn't as planted its not taking to the track very well.

553 diff
30wt blue front 35 purple rear 8 hole tampered 1.3
27 front 28 rear height
Droop 99 front 116 rear
Sway front 2.3 rear 2.5
Shock front third hole down tower -a arm inside, rear third hole down -outside a arm
Camber rear tower inside down hub closes hole near tire, front tower upper hole and hole closes tire

1.5 toe right left =3 degrees

I've made a lot of adjustments this is the best so far but I'm not happy with its performace. Also it has a slight push but the rear is fish tailing I've tried every tire trust me I have many types settled on ibeam soft.

Track is technical light dust size small. I'm not able to keep up cause I'm worries about the rear and I'm baby it and losing track time. Thinking about dumping and going Los I tekno.

Last edited by bigjayjay1; 12-05-2011 at 07:19 AM.
bigjayjay1 is offline