R/C Tech Forums - View Single Post - Serpent 811E Buggy Thread
View Single Post
Old 11-27-2011 | 01:59 PM
  #777  
Captainlip
Tech Adept
 
Joined: Oct 2011
Posts: 162
From: Manchester
Default

Originally Posted by moth898
pinks come with the kit

there is no chart I know of

#2 ackerman plate is a liked option

40 front 30 rear oils with 1.4 hole piston-Purple front blue rear is a real good starting point.

0-0 inserts up front. 4 up- 6 in inserts in the rear.

5000-5000-3000 oils in the difs

my car is stable as heck with this set-up. This is a very good starting point for the nitro version, I imagine it can't be that different for the e-version, its what I'm building my e-with.

keep a eye on the serpent site, they always have a couple of team drivers posting setups. I'll be at the clash in florida, hopfully I'll get a chance to speak to Billy Easton. If I get any set up advice I'll post it up here.
Thanks for that!

Out of what you just mentioned whats an option part that I will need, I know the #2 ankerman plate is but what else wont come in the kit?

Finally what oils come in the kit?

I have 7500k 12500k and some durango 250ct and 300ct so may need to buy some if they arent in the kit.

thanks.
Captainlip is offline