R/C Tech Forums - View Single Post - SC10 4x4 Thread
Thread: SC10 4x4 Thread
View Single Post
Old 11-25-2011 | 05:42 PM
  #11468  
socalrcer's Avatar
socalrcer
Tech Adept
 
Joined: Dec 2010
Posts: 111
From: WCRC
Default

Originally Posted by BQRacer
Hey all I’m running JR Mitch’s Indoor, blue groove, high-traction, bumpy. At the end of our straight away we have a 90* turn that takes you to a triple. I have a hard time making it, on entry of the 90* turn my rear end wants to step out on me. What setup changes should I start trying? I went to the yellow rear springs and it felt that same. I was also wondering how I could get a little more on power steering?

thanks
Assuming you have the right tires for the track, if you are not running yellow springs in the front, you might try them with blue in the back. Taking grip from the front adds to the rear. You could add drag brake so that you do not over brake using your trigger finger. Using the over drive in the front will give you more pull coming out. Otherwise, try going outside, in, outside on the turn to wide the radius and help take away the abrupt side to side weight shift. Breaking earlier before the turn might help as well.

This is a little tricky, as a truck with a loose end is faster for some and causes issues for others, and you might end up tuning for one jump and slowing you down for the rest of the track. Good luck.
socalrcer is offline