R/C Tech Forums - View Single Post - ESC cut-off question
View Single Post
Old 11-22-2011 | 05:11 PM
  #4  
Duster_360
Tech Lord
iTrader: (21)
 
Joined: Jul 2008
Posts: 11,530
From: Houston, TX
Default

I'd want 7v as an lvc as well, but if you can't set it that high, set at 6v and watch for teh slowing that was mentioned. After a few runs, it should be easy to see and tell its time to recharge. The other way is to watch what the charger puts back in - you don't want to be recharging more than 80%, so if its a 5000mah, if everything is where it needs to be, you will recharge less than 4000mah. I typically see 3700-3800mah (an a little more) on recharging.
Duster_360 is offline