I have two GT2 sets and the same problem with each of them. After attaching the esc (40A Turnigy Plush) and programming it normally to recognize throttle hi and lo points, the motor responds correctly to the throttle but the steering servo no longer responds to the steering wheel on the tx. Oddly, the steering trim adjustment does still work even though the servo does not move when the steering wheel is turned.

As an experiment, I switched the throttle and steering positions on the receiver, after which the throttle responds to turning the steering wheel and the steering servo responds to the tx throttle control! Weird.

Surely I'm doing something wrong, but I fail to see what it is. Probably something simple, one of those "duh" things.

Some help here would be appreciated.