R/C Tech Forums - View Single Post - TEAM XRAY X12
Thread: TEAM XRAY X12
View Single Post
Old 11-17-2011, 04:23 AM
  #57  
jensroland
Tech Apprentice
 
Join Date: Aug 2010
Location: Denmark
Posts: 56
Default

I have just taken the first rounds with the new X12 - approved.

I drove only 28 rounds, but make faster laptimes than I normally do on the first drive on the day

I started - chages from the xray start set-up - with 20.000 (speedmerchant medium) in the sidetubes, gold sidesprings, 171 mm width back, active castor 7,5 degree + 1 mm shim front and 4 mm of shims on the stering block to raise the steering rod.

Way too much steering - both off and on power - and very nervous. But way more stability straight line and entering the corners - both highspeed and low speed corners.

I will on next drive try 30.000 (speedmerchant blue) in the sidetubes, black sidesprings, black centerspring and remove some of the preload of the sidesprings. I have noticed that preload on the sidesprings add steering.

Kind regards; Jens
jensroland is offline