Originally Posted by
BlueGlowBoy
The seals that come with the bladders are for if you are going to run "emulsion" shocks. Do NOT install them AND the bladders.
If you are running bladders, and you are getting leaking out of the lower hole, your bladders are not sealing properly. take teh shocks apart and look for any deformities or tears in the bladder. If there are none, rebuild the shock, making sure to tighten the cap down far enough.
If that STILL doesn't do it, shoot us some pics caps on, caps off, and the bladders not installed, and we might be able to offer other suggestions.
Ok thanks. If I cant fiquire it out I will post pics later today. I think my bladders are not in the best of shape either which is probably causing my promblem. Also the stock bladders are way to hard in my opinion, so maybe if they got bent up they didnt go back to the shape they where in when they where new. Since they are this hard it might cause the bladder to not sit properly in the shock.