Originally Posted by
jovenshadow
i will keep all this in mind mate and for now i will adjust the angle to 15* and add fan in my heatsink in the ESC (i already put small heatsink in the esc) and put fan also in the motor. i will set also 200*f in my motor and esc cutoff as i assumed the temp sensor reads from the inside and not outside the can or the outside the esc case. again tnx for the info
Yeah sorry it does read on the sensor board the temp of the motor..... but if you keep the can on the outside at 160*f and below it will run all day and all night and be hasle free for a very long time.... I am only exploring new limits with pushing temps vs reliability so timing and all sorts of things.... I know everything there is to know now just the matter of doing all the testing myself and writting it down as I have spoken to a couple of very knowledgeable with the viper gear so I am all on the right track.....
Anything else just hola....
Fordy