R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 11-12-2011 | 07:44 PM
  #7355  
Jake S's Avatar
Jake S
Tech Elite
iTrader: (67)
 
Joined: Jan 2007
Posts: 4,833
From: Erie PA
Default

Originally Posted by vinny73
Battery is all the way forward.
try moving it back 1 spacer. it might help smooth it out some.

the other thing i want to ask if how many washers you have on the steering block (bump spacers) i run 2 because it smoothed out the steering alot, and seemed like it gave it more steering in the middle of the corner even while being smoother.

Originally Posted by YankeeFan123
if you run the bulldog body you get more steering and if you get a wing and dont cut down that much of the back then you gain rear traction
i have used both the bulldog and the finnisher body, and the jconcepts gave the buggy alot more steering, but because the way the rear of the body is it gave the wing alot cleaner air, so not only did if give it more steering, the use of the 6 1/2" hi clearance wing gives that combo alot of rear bite also..

imho the finnisher + hi clearance 6.5" wing (cut down to 2 or 3 lines) is alot better than my bulldog body could have ever dreamed.
Jake S is offline