Originally Posted by
Blueman Austria
Sorry for the delay .....
So outside to outside of the bearings is : 28,1mm
Diff outdrive outer to outer is : 54,7mm
Bearing to pulley : shot side 5mm long side 15,5mm.
The pulley itself (there where the belt runs) is outside to outside 7,5mm
I dont know if i understood you with the bearing to pulley question...
Greetings Rainer
First off, thanks for your effort. what i meant was when you press in the outdrive bearing, the distance from the outside of the bearing to the nearest side pulley wall. also what is the weight of the gear diff ?