R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 11-09-2011 | 03:20 PM
  #7280  
Timmahhh's Avatar
Timmahhh
Tech Fanatic
iTrader: (15)
 
Joined: Oct 2008
Posts: 888
From: Hoffman Estates, IL
Default

Originally Posted by Cpt.America
If you are doing a LOT of dynamic timing advance with a 17.5, I would start with 78/28. If you are doing NO esc timing at all, I would start with 78/32. Of course which motor, which esc, and what track you are on can change what you run.
I run 27/72 with a moderate amount of boost. When I was near maxed out on boost (tekin rs), the car was FAST! Too much top end for my track. I'm down to 30 degrees advance now, from 50.

32/78 seems like a lot of teeth. Will that even fit? Low 30's on pinion is the right ballpark for unboosted stock though.
Timmahhh is offline