Because of the greater amount of weight in the front when it transfers it transfers alot. Not like a typical buggy where most of the weight is in the middle so it takes a lot more to transfer the same amount. It's a different concept but play around with it. You will see it on the track. When I went soft in the rear and stiff in the front I had pizza cutters on the front. Once I stiffened up the rear sprigs the pizza cutters went away. With the soft springs in the back the front was up high and it behaved more like a 2wd which is what made the rear so loose. Even with the serpet white sprigs on the rear my car still pulls wheelies on the street if I pull the trigger too hard because of all the rear traction. Mess around with it, it takes a little bit to get use to how this buggy responds.