Originally Posted by
the catman
Hi Everyone have finished building the v10 /11 with a rb concept rc11 engine
my problem is that the clutch won't engage. I have setup the clutch as per book with the necessary adjustments but the clutch just doesn't want to work.
any help would be great or if any one in Sydney Australia who has one can you send me a PM
Thanks Nigel
It should work... either the gap is too large or the spring tension is too much. I setup one in hurry on the TM at the nats and was way too tight and it didnt engage. So I backed it right off.
The gap should be somewhere in the order of .6mm and you could loosen the tensioner nut to the end of the thread and start from there.