R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 11-04-2011 | 11:25 AM
  #7140  
Matt Trimmings's Avatar
Matt Trimmings
Tech Champion
iTrader: (171)
 
Joined: Jun 2006
Posts: 6,313
From: Tucson AZ
Default
Originally Posted by aeRayls
Use a #2 piston or a #3 drilled out to 55.

Put the 3/4 oz in front of the servo.
It is actually placed behind the servo (if you have room) or in front of the battery.
Matt Trimmings is offline  
Reply