Originally Posted by
fastrc64
you might want to check that closer because the sc10 2wd with the 12mm hex and the standard sc10 4x4 wheel it is the same track width as the sc10 4x4 with hazard wheels and with hazard wheels on the sc10 2wd it is 6mm wider then the sc10 4x4 we have a sc10 2wd
so if the sc10 4x4 is at max track width using the hazard wheels you are over on the sc10 2wd
however i run 2wd kyosho scr i thought about using the hazard wheels on it they might work pretty good on it and be within limits for track width just my observation and measurements.
The sc10 2wd is the same track width as the sc10 4x4 when using their respective stock wheels OR using the associated hex conversion kit and running the stock 4x4 rims on the 2wd. Ryan Maifield ran the hex conversion kit and the +3 mm Hazard rims on his 2wd sc10 at the Roar nats.