Originally Posted by
ShortCourseOnly
I'm glad that Krio responded before me. On the Jconcepts site they state that the Hazard wheels work for SC10, SC10 4x4 and SCTE and XXX-SCT. All have to have the 12mm hex so the SC10 requires a conversion.
I have these on both of my SC10s, 2wd and 4wd, and the track width matches. It is stated by JC that this makes the SC10s meet the max ROAR limit of 296mm. The 6mm width change gets you there.
you might want to check that closer because the sc10 2wd with the 12mm hex and the standard sc10 4x4 wheel it is the same track width as the sc10 4x4 with hazard wheels and with hazard wheels on the sc10 2wd it is 6mm wider then the sc10 4x4 we have a sc10 2wd
so if the sc10 4x4 is at max track width using the hazard wheels you are over on the sc10 2wd
however i run 2wd kyosho scr i thought about using the hazard wheels on it they might work pretty good on it and be within limits for track width just my observation and measurements.