Originally Posted by fastrc64

if you want your truck to push i would try this setup
1 bladders all the way around use 1.1 pistons with 30 wt ae fluid front and 25 rear rebound 50% blue springs all the way around center holes front and rear shock towers and outer holes on front and rear arms

shim 2mm on outer steering knuckle
shim under front camber link 5mm and rear 4mm
-1 camber all the way around
over drive pulley 19 tooth
24 mm front and 23mm rear ride height
yellow sway bar front blue rear
diff front 10k rear 7k

it wont hurt to try it that should develop a push good luck