Originally Posted by
the_freak
ok thanks
now 1 ekstra question howe the hek do i make them then ???GGG
ive try the bladder style and are use to that but the emulsion i dont know howe to get right are ther any trick to it??
I know there is a video on the AE site that goes through the details. I follow that proceedure. It is actually simple:
1) Fill the shocks with oil
2) Use the seal provided with your kit and install it in the shock cap
3) Complete the fill to just over full on the shock body.
4) With the bleed screws removed, install the cap on the shock body
5) Now slowly compress the shock completely. Shock oil should leak out of the bleed hole. Maintain the shock compressed
6) With the shock compressed, install the bleed screw with seal.
7) Actuate the shock to check for air and ensure there is no rebound.
This is what I do and it works great.