I just finished painting/cutting/mounting the new 0222 HiFlow body on my SCTE and I love the look, love the vents but I need to comment on a couple things.

1) On a SCTE with stock-offset wheels, it's not even close to covering the front tires. At a race with the, "body must cover the tires" rule, even the most liberal/blind tech guy would have a very, very hard time looking the other way as this one came through.
2) I used the dimples as labeled for the SCTE and because the front tires don't really fit under the body, I have to run the front end of the body absurdly high or go to about -10 front camber to get them under as the suspension compresses or the body hits the tires bad. Thankfully I didn't cut the front of the body to the trim line but after getting everything settled on the car, I still have room under the grill sticker for a whole additional grill sticker to fill the gap before the top of the front bumper. FWIW, this is with Barcode tires and not anything wider.

I'd love to see the body massaged a bit to get a better fit on the SCTE or introduce a separate, "first ever SCTE-specific racing, flow-style" body for the SCTE.