Originally Posted by
pvalenti
Yellow springs in front, 32.5wt front/27.5wt rear, middle shock tower (front and rear), outter arm (front and rear), add 4mm spacer (made from 1mm suspension washers) under the inner camber link in front and 2mm in rear, set ride height to 22/24 (front/rear).
The most important of those being the spacers under the inner camber links...it drops the roll center of the truck, as does lowering the ride height. The heavier front springs stiffens up the suspension a bit and will help also with roll-over a bit.
Thank you for the reply! I will definitely try the things you suggeste. I already have yellow in the front with I believe 32.5, so I just have to work on the rear end. I totally forgot about moving the camber links to adjust the roll center. Thanks again!