So I have been reading all these posts about camber, roll center and shocks/car balance. I was wondering why do the shocks have to be so similar according to the posts i read the shocks should feel balanced or feel the same front and rear..I dont understand why this will help one out since a lot of the time my front is a tad softer just because i run on a tight track, the rears are a little lighter oil but a smaller piston holes...
front-#1 pistons 30 weight oil and 3 limiters.
rear-#2 pistons 25 weight oil and 2 limiters..
dark yellow kyosho springs all around which are a bit stiffer than stock b4.1 ft setup..

o yea b4.1 factory team is what I am running..

a lot of help full stuff on here thanks!