R/C Tech Forums - View Single Post - SC10 Thread
Thread: SC10 Thread
View Single Post
Old 10-27-2011 | 08:13 AM
  #7667  
Asharus's Avatar
Asharus
Tech Elite
iTrader: (42)
 
Joined: Apr 2011
Posts: 3,123
From: Long Island, NY
Default

Originally Posted by HighLife420
Wow, im running a pretty similar setup (17.5, timing +20 degress) with a 75 spur and 25 pinon. I ran my car last night for about 10mins and my temps were barely over 110F.

Do you notice that you have no real acceleration with this combo? I have my timing engage RPM set low (9.1k) to give myself that punch to hit a big jump after a turn or slowing down prior.

I have a 24-25-26-28 pinons to try, havent gone past 25 yet though.
The 17.5 classes in my area are no boost on the speedo, but you can advance timing on the motor can. Last time out I had 75/28 with the stock 30deg timing on the can and it felt great...

I've run it at 75/28 with +15 on the can on a larger track 2 weeks ago and it felt even better. I turned the timing back to stock last time because the track was smaller and indoor, to keep temps down.

Edit: If you're at 110F, you're not gearing high enough. Stick a 26 on there and see how it goes.
Asharus is offline