R/C Tech Forums - View Single Post - Speed Passion Thread
View Single Post
Old 10-24-2011 | 10:42 AM
  #684  
mjk1210's Avatar
mjk1210
Tech Elite
iTrader: (9)
 
Joined: Sep 2008
Posts: 4,539
Default

Originally Posted by s22jgs
Thanks for the reply to my original message outside of this thread. Im still mightily confused.

I have loaded on V3 119 MOD which has confused me even more. having been told turbo not needed but use boost, the boost seems to be disabled yet turbo is all turned on lol.

So i have loaded the 205MOD as suggested.

I also have no physical timing adjustment on the motor. so its purely down to software, which makes me think i might need to run a tad boost or turbo, but not having a real understanding of how it all works yet i could be blowing smoke lol.

could someone please explain things to me, i feel terribly out of my depth.
It's easier than you think. The 205mod software especially because there are less settings to worry about. DRRS is the setting for initial launch. 1 is super smooth and 9 is very punchy on the bottome end. (a tight slipper clutch on the 22 will make if feel punchier too).
If I recall the 205 mod has a setting at the end that the lower setting is the hottest and fastest. I would run the 8.5 at about 3-4 and geared about 21/76 to 24/76 depending on where you are and how it feels to you.

If you try the 323 stock software it can serve you well with an 8.5 as well but has more adjustments. Good/bad depending on how you look at it. The advantage to using the 323 stock software is that for the 8.5 you can turn the boost and turbo settings down and then if you want to run a 17.5 you can crank them up and have a WICKED fast motor.
mjk1210 is offline