R/C Tech Forums - View Single Post - Clockwork Racing Engines and Products...
View Single Post
Old 10-24-2011 | 08:55 AM
  #3631  
Jeff Ford
Tech Master
iTrader: (24)
 
Joined: Feb 2002
Posts: 1,003
From: Savage, Mn
Default

Good running with you as usual Nick and thanks for the help finishing up the track on Thursday eve.


Now onto Josh's results, first time racing the Clocked engines for Josh, he qualified 3rd in Buggy using a clocked NINJA JXBO2, Neal did some unique work to the engine for Josh as he is on the gas hard to say the least. Josh finished right where he started, 3rd, but had more power than he has ever had out of an engine. Ran perfect all weekend temping between 220 -250 and getting about 8.5 minutes run time, which for Josh is real good.. We used a Werks 2058 pipe/header on it with the Ascendecy clutch. I have a feeling that Neal will be offering up this engine real soon.

In Truggy, he qualified 4th and finished 4th in A main, used a Nova Rossi Bonito as recommended by Neal. By the time the mains came up, the engine was perfectly broken in and this was the first time ever that Josh said he had more power than he could use in a truggy, we did have to get Nick to bring along a M2C clutch to put in it so that he could use the power in the engine, all the other clutches we tried slipped some. We used a OFNA 086 pipe/header as recommended by Neal and it was the ticket.


Thanks to Neal and John for the engine support, like Nick mentioned, the next Nitro race in this area with be at the Motodome again during the winter months unless we travel south to warmer weather.
Jeff Ford is offline