Originally Posted by
Farmer_John
Non basket garodisc users, what are you using as a starting point for slipper tension? 3.5mm as stock, or something tighter/looser?
Originally Posted by
kghills
When Jason did not run the Basket clutch he used the FT friction disks and the V2 Slipper spring from a B44.1. 4mm would be a good starting point. You will find the B44.1 spring will not collapse like the one in the kit.
Keith.
I'm about 3.25-3.5mm. I do have an extra washer behind the thrust bearing though, don't know if that makes a difference, guessing it does a little. Nice to know a different spring is out there, I hate this spring.