R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 10-23-2011 | 06:53 PM
  #6808  
Jake S's Avatar
Jake S
Tech Elite
iTrader: (67)
 
Joined: Jan 2007
Posts: 4,833
From: Erie PA
Default

Originally Posted by rripp
I tried the worlds and Brents setups but they werent right for me. So this setup is really good at our track and if you have a medium to high grip indoor track..try it.
after running a locals b4 with ae green springs up front and seeing some running blacks, on a smoother indoor wet clay track... i ordered a pair of kyosho silvers to try on my buggy next weekend. (ae green-3.5 ae-blk-3.2 kyo silver-3.3)

im running a very close setup to Thielke's setup. the main changes 1A camber link in the front and running .5 rear hubs with the 2.5deg block. also ae 30wt in the front with a #2 piston in the rear.

also waiting for a finnisher +8 to come back from the painter after trying one on my car this weekend i had to get one, made the car jump more flat and gave alot more on power steering then the bulldog. and will be switching from the 5.75" proline wing to the 6.5" high clearance wings, starting with 2 lines, maybe going down to 1.
Jake S is offline