Originally Posted by
the_freak
hey u guys running this motor what pinion size are u running??
im going on a loose large track whit alot off big jumps and alot off lower troutel punch running ( i hope u get what i mean)
ballitisk 4,5T and planing to run the 62T spur gear 32P im getting 11,12,13 T pinion for a start. and what temps are u getting ??
Just did my first test run. Was mostly full throttle runs up and down my street (using the stock tires since they suck anyway) for about 15mins and was around 110deg on the motor and 85deg on the esc. Outside temp was around 60deg
I was using 12/62.
I'll probably go with 13/62 or 13/60 depending on the track.