Originally Posted by
chicky03
Here is a list of parts you will need to complete the kit. If you have had a 12th scale before you might have some or most of it already.
1. Complete 12th rear axle and diff. Recommended IRS2132BK or IRS2136 for CRC and Xceed tires.
2. 12th center shock, AE, Hotbodies, IRS, CRC, Silva
3. ASC6274 ball cups, for damper tubes, steering and shock
4. Ride height adjusters Recommended IRS1167
5. 3mm flat head screws 3x6
6. Servo mounts
7. ASC31284 for top of shock and 1mm shim under ball stud.
8. ASC4635 side links and football
9. ASC4637 link pivot balls (5)
10. Body mounts
11. ASC4686 R5 front end or just plastic parts and camber turnbuckles
12. ACS31280 Short ball stud for bottom center shock mount, and servo saver
13. turnbuckles for steering
14. 3mm low profile nuts
15. Kimbrough Medium servo saver
The turnbuckles and body post in the picture are from Serpent. The tubes come with the kit.
Let me know if you have any more questions.
What would you suggest as a similiar list for the OP105 serpent conversion? so far i have:
1. ASC6274 ball cups, for damper tubes, steering and shock
2. ASC4635 football
3. ASC4637 link pivot balls (5)
4. Kimbrough Medium servo saver
5. SER411201 (2) to make 4 total rear standoffs