R/C Tech Forums - View Single Post - Help me understand why should I replace the Traxxas stock servo??
Thread: Help me understand why should I replace the Traxxas stock servo??
View Single Post
Old 10-13-2011 | 02:35 AM
  #10  
eri3f0g's Avatar
eri3f0g
Tech Addict
iTrader: (14)
 
Joined: Apr 2004
Posts: 507
From: Erie, Pa
Default
Originally Posted by mkiiina
Might want to check out the Hitec 645MG. Run about $30-40 and is a great drop in replacement for the stock traxxas servo. I run these in 4x4 slash's and my stampede and its alot faster than the stock traxxas servos.

if needed you can step up to the hitec 985 or the 7955 which I use in my 1/8 bl conversions.
I disagree on the 645. The servo you have is better than that. Also the hitec is a analog servo, not digital, so if you use a premium radio you may need to drop down the signal rate to compensate for the servo.

Transit time: 0.24 sec/ 60 deg. @ 4.8V (0.20 sec/deg @ 6V)
Torque: 107 oz/in @ 4.8V (133 oz/in @ 6V)

this : http://www.amainhobbies.com/product_...ite-Gear-Servo

would be comparable to the savox 1258tg. Keep in mind that even though I link amain there are vendors out there as well as even folks on these boards that offer fabulous deals.
eri3f0g is offline  
Reply