R/C Tech Forums - View Single Post - The Speed Passion Thread
Thread: The Speed Passion Thread
View Single Post
Old 10-12-2011 | 01:39 AM
  #8093  
JRRobiso's Avatar
JRRobiso
Tech Addict
 
Joined: Aug 2003
Posts: 659
From: Scottsdale, AZ
Exclamation
Originally Posted by Solara
You might be running the sensorless mode....there should NOT be any light when you are in neutral position. Check your sensor wire and all the connection.
Originally Posted by John Pape
Sounds like it gone into sensorless mode, try changing the sensor wire, failing that unfortunately, your gonna have to change the sensor in the motor.
Flashing green LED @ neutral report.....changed sensor wire twice (brand new ones too) and still getting the same result. Current software I have is the default 090205MOD that came with my GT2.0 PRO, only thing that was changed on the profile was the AMTS set to 15 as suggested (by Solara).

Tried the other default MOD profiles (100528 and 110119) and the funny thing is.....I don't get the flashing green LED @ neutral anymore. Don't know why. Current motor I have is the Silver Arrow V2.0 5.5R and my lipo pack is a Gens Ace hardcase 7.4 2S 5000mah 40c.

Current MOD profile on my ESC is the 110119 that I will use when I go to the park bashing with my daughter later this week but need to know what to adjust so I don't blow up my ESC/MOTOR.

Thanks for any help you guys can provide.
Last edited by JRRobiso; 10-12-2011 at 09:03 AM.
JRRobiso is offline  
Reply