I was wondering if anyone has tried the brushless servos from Bluebird?
What were they like? Longevity? Customer service?

These are the ones I'm looking at:

BLS-2209 is a High Voltage (7.4V) Brushless Digital Servo featuring Titanium gears and an Alu heat sink case.

Specification:
Weight: 66 grams
Dimensions: 54.50 x 20 x 39 mm
Torque @ 6V: 18 kg/cm
Torque @ 7.4V: 22 kg/cm
Speed @ 6V: 0.11sec / 60 deg at no load
Speed @ 7.4V: 0.09sec / 60 deg at no load
Alu Heat Sink Case
Titianium Allow Gear
Brushless Motor
Digital

And...


The BLS-3114 is a High Voltage (7.4V) Brushless Digital Servo featuring Titanium gears and an Alu heat sink case. The BLS-3114 includes a heavy duty servo horn set.

Specification:
Weight: 71 grams
Dimensions: 40.5 x 20 x 39 mm
Torque @ 6V: 25 kg/cm
Torque @ 7.4V: 31 kg/cm
Speed @ 6V: 0.16sec / 60 deg at no load
Speed @ 7.4V: 0.14sec / 60 deg at no load

Features:
Alu Heat Sink Case
Titanium Gear
Brushless Motor
Digital Servo
Dual Ball Bearing
JR style connector
Compatible with 2s Lipoly (7.4v), 6 cell Nimh & 2 cell A123 (6.6v).

The fact that they are brushless with tons of torque and high voltage is awesome. I don't want to hear about any hear say or they're cheap so they're garbage, I would prefer to hear from people who have actually used the servos I've listed. And I don't like Hitec so I don't want to see any comments that say Hitec is the best or any other servo companies out there for that fact. I'm only interested in the 2 Bluebird servos I've listed and from people who have actually used them with real experience with them.

I have 2 Turnigy mg959 servos and they have been through hell and back and I've never had a problem with them, they may not be the fastest but for $23 each they're f***ing great. So I'm a big supporter on getting a good deal even if it's from a company thats not Hitec, Futaba, KO, JR or any of the over priced servos out there.

Don't mean to be brash but someone is going to write something to crash my thread but I don't give a s**t about them I want actual facts about these servos not BS.

Thanks in advance,
Philip