R/C Tech Forums - View Single Post - RC10B4.1 FT/WC
Thread: RC10B4.1 FT/WC
View Single Post
Old 10-09-2011 | 06:04 PM
  #6379  
T-BirdJunkie's Avatar
T-BirdJunkie
Tech Elite
iTrader: (10)
 
Joined: Nov 2004
Posts: 2,974
From: Norwood, OH...and CCRCR and The OhioRCFactory
Default
Originally Posted by slammin1984
I have a t4.1 and I just recently purchased some rpm wheels. they are the revolver and bully style. anyway, i glued tires and mounted them. the fronts hit the a arm when i turn the wheel all the way. I have a dx3s and i put the travel down to 65% before it stopped rubbing the a arm. I tryed spacing the wheels but when I put shims in it the wheel locks up and you cant spin the wheel. when I loosen the axle nut enough to spin the wheel the wheel itself becomes wobbly. this sux because i just spent over $100 on wheels and tires. has anyone else run into this and if so what is the fix?!?!?!?!
your stock wheels weren't hitting at all? That's odd, ThunderbirdJunkie's run RPM wheels on all of his AE 2w trucks (GTs, T2s and T3s, never owned a T4/.1) and never had that issue. Are you sure you don't have parts swapped left to right? Like left arms on the right side of the truck, etc?

You should ALWAYS use your EPA on your radio for steering, especially if you're using a digital servo.
T-BirdJunkie is offline  
Reply